Be the first to leave a review.
Be the first to leave a review.
$4,290.00
- Description
- Reviews (0)
VCU = VEHICLE CONTROL UNIT
VCU only. No Harness. No plug and pins.
VCU OVERVIEW
Nexus R5 is Haltech’s flagship product combining the functionality of a power distribution module, a data logger, a dual channel wideband controller and a state-of-the art engine management system in one powerful device we call a VCU (Vehicle Control Unit).
- 4 x 25A (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump)
- 12 x 8A (continuous) high side outputs (low speed PWM, 200 Hz) outputs (power to sensors, NOS solenoids, etc)
- 18 x peak/hold injector drivers (can be used as low side drive outputs)
- 12 x low current ignition outputs (can be used as low side drive outputs)
- 8 x low side drive outputs, PWM capable (DPOs)
- 4 x push-pull / h-bridge outputs (8A, PWM capable), eg for electronic throttle
- 23 x 0-5V analog inputs with redunancy for electronic throttle and switchable 5V pullup
- Trigger and home inputs with differential inputs, adjustable thresholds and glitch filters
- 10 x synchronous pulsed inputs, zero crossing or adjustable thresholds – cam sensor inputs, frequency inputs or 0-5V analog inputs
- 2 x onboard wideband controllers, supporting NTK and LSU4.9
- 3 x CAN ports with switchable termination
IMPORTANT EMISSIONS NOTICE:
In many states, it is unlawful to tamper with your vehicle’s emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.
Reviews
There are no reviews yet.
Be the first to review “Nexus R5 VCU HT-195000”
- Description
- Reviews (0)
VCU = VEHICLE CONTROL UNIT
VCU only. No Harness. No plug and pins.
VCU OVERVIEW
Nexus R5 is Haltech’s flagship product combining the functionality of a power distribution module, a data logger, a dual channel wideband controller and a state-of-the art engine management system in one powerful device we call a VCU (Vehicle Control Unit).
- 4 x 25A (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump)
- 12 x 8A (continuous) high side outputs (low speed PWM, 200 Hz) outputs (power to sensors, NOS solenoids, etc)
- 18 x peak/hold injector drivers (can be used as low side drive outputs)
- 12 x low current ignition outputs (can be used as low side drive outputs)
- 8 x low side drive outputs, PWM capable (DPOs)
- 4 x push-pull / h-bridge outputs (8A, PWM capable), eg for electronic throttle
- 23 x 0-5V analog inputs with redunancy for electronic throttle and switchable 5V pullup
- Trigger and home inputs with differential inputs, adjustable thresholds and glitch filters
- 10 x synchronous pulsed inputs, zero crossing or adjustable thresholds – cam sensor inputs, frequency inputs or 0-5V analog inputs
- 2 x onboard wideband controllers, supporting NTK and LSU4.9
- 3 x CAN ports with switchable termination
IMPORTANT EMISSIONS NOTICE:
In many states, it is unlawful to tamper with your vehicle’s emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.
Reviews
There are no reviews yet.
Be the first to review “Nexus R5 VCU HT-195000”
Published On: March 23, 2023|Tags: Haltech|
Related Products
Nexus R3 VCU + Plug and Pin Set HT-193100
$2,520.00
Add to cartDetails
NEXUS R5 + Universal 16′ Wire-in Harness Kit HT-195201
$4,990.00
Add to cartDetails
Elite 750 + Premium Universal 8′ Wire-in Harness Kit HT-150604
$1,549.00
Add to cartDetails
Elite 2500 + GM GEN IV LSx (LS2/LS3 etc) DBW Ready Terminated Harness Kit HT-151367
$3,095.00
Add to cartDetails
Elite 2000/2500 Toyota Chaser JZX100 (1JZ-GTE) Plug ‘n’ Play Adaptor Harness Kit
$505.00
Add to cartDetails
Nexus R3 VCU HT-193000
Rated 5.00 out of 5
$2,390.00
Add to cartDetails
Elite 1500 + 16′ Premium Universal Wire-in Harness KitHT-150905
$2,190.00
Add to cartDetails
Elite 2500 + 8′ Premium Universal Wire-in Harness Kit HT-151304
$2,430.00
Add to cartDetails
R5 + Universal 8′ Wire-in Harness Kit HT-195200 NEXUS
$4,875.00
Add to cartDetails
Elite 1500 ECU ONLY HT-150900
$1,599.00
Add to cartDetails
Elite 2500 + 16′ Premium Universal Wire-in Harness Kit HT-151305
$2,565.00
Add to cartDetails
NEXUS R5 + Plug and Pin Set HT-195100
$4,480.00
Add to cartDetails
You might also like…
Fusible Link Black (Main)
$18.00
Pressure Plate Bolts OEM
$20.00
Exhaust Manifold Washer OEM
$22.00
Exhaust Manifold Stud OEM
$38.00
Exhaust Manifold Nuts OEM
$25.00
Fuel Filter Adapter Fitting
$15.00 – $45.00
Walbro 255 Fuel Pump
$160.00
Clutch Fork
$90.00
Fuel Line – Filter to Hardline
$60.00
Fuel Line – Filter to TB
$80.00
12% OFF
Fuel Sending Unit
$220.00 – $370.00
Fusible Link Red
$18.00 – $60.00
Fusible Link Green
$18.00 – $60.00
G54B Timing Cover Gaskets
$20.00
G54B Oil Pickup Tube O-Ring
$18.00
Title
Shortcuts
Contact Us
Subscribe
Get notified about special sales or when we release new products.
© 2023 MKS Motorsport | A Mikie Sorrell Company
